Skip to Navigation

  • items in your bag
  • Cost
  • checkout

Home > Kitchens Sinks Taps > Kitchen Filter Taps

Kitchen Filter Taps

Kitchen Filter Tap. In this section we have many types of 3 way filter taps, these include small filter taps like the Brita 3 way filter tap or larger filter taps like the Franke Filterflow taps. Some of these filter taps come with remote hand sprays.

Featured in this section are the Brita 3 way kitchen filter taps. These are a smaller than your average tap that is ideal if you want fresh filtered water but are limited by space. These use Brita's popular water filter cartridges but incorporate them into a kitchen water filter tap. The Brita taps uses a traffic light system for replacing the filter cartridge. When the light goes red on the base of the tap this means you need to replace the filter. Also featured in this section is the new Franke Filterflow Range of water filter taps. These use Franke's expertise in monoblock taps and incorporate a water filter system. The filter system itself is made from high grade stainless steel, which makes it a very robust system.

All the filter taps come with 1 filter cartridge and all the fixings and pipes to fit your tap.

Sort by:        

Franke FilterFlow Olympus water filter tap

Franke FilterFlow Olympus water filter tap

In stock

631.80 (Including VAT at 20%)

Franke FilterFlow Kubus water filter tap

Franke FilterFlow Kubus water filter tap

In stock

631.80 (Including VAT at 20%)

Franke FilterFlow Doric water filter tap

Franke FilterFlow Doric water filter tap

In stock

631.80 (Including VAT at 20%)

Franke FilterFlow Corinthian water filter tap

Franke FilterFlow Corinthian water filter tap

In stock

611.55 (Including VAT at 20%)

Franke FilterFlow Kubus Hand Spray filter tap

Franke FilterFlow Kubus Hand Spray filter tap

In stock

869.87 (Including VAT at 20%)

Franke FilterFlow Olympus Hand Spray filter tap

Franke FilterFlow Olympus Hand Spray filter tap

In stock

869.87 (Including VAT at 20%)

Franke FilterFlow Doric Hand Spray filter tap

Franke FilterFlow Doric Hand Spray filter tap

In stock

826.29 (Including VAT at 20%)

Franke FilterFlow Corinthian Hand Spray water filter tap

Franke FilterFlow Corinthian Hand Spray water filter tap

In stock

826.29 (Including VAT at 20%)

Franke FilterFlow Mini filter tap

Franke FilterFlow Mini filter tap

In stock

232.14 (Including VAT at 20%)

Useful tips...

  • Monoblock taps - These kind of taps will fit nearly all sinks, the standard cut out for these taps are 35mm diameter, this is usually the same on all sinks, some larger taps may use a wider be so it's always best to check the dimensions on the individual products to make sure it will fit your sink.


  • Pull-Out Taps - These taps can be fitted to nearly all sinks as there cut out is usually the standard 35mm, obviously check before buying as one or two do have a slightly larger shank to them. Another thing to look out for on Pull-out taps is water pressure. Most pull out taps have a lower flow rate than a standard monoblock tap. This means that people with low water pressure from either the mains feed or the hot water tank may find that a pull out tap is not suitable for your situation. It is best in this situation to consult your plumber. For most people with a good cold feed pressure and a header tank at least 4m away/above them will find that a pull out tap will be fine.


  • Tap Brace - When fitting monoblock taps to stainless steel inset sinks you can find that when operating the levers or handles the tap will cause the sink to flex. This is normal because inset sinks are metal and it will flex. Franke have developed a Tap Brace that fixes to the base of the tap underneath the sink and then to your worktop buy either screws for wooden or laminate worktops or a sticky pad for granite and composite worktops. By clamping or bracing the tap to the worktop this eliminates the majority of the flex and will stop any warping to the metal.

Beau-Port Kitchens - "Individuality designed for you, affordability included by us."

Unit 2 & 3, Bellhanger Business Park, Bentworth, Hampshire, GU34 5QZ